Aluma Cut Die Grinder Bits Carbide burrs are tools commonly employed in metalworking for tasks such as cutting, grinding, and shaping metal surfaces. Typically crafted from a mixture of tungsten and cobalt metal powders, carbide is a remarkably hard and wear-resistant material, formed through sintering at high temperatures and pressures.
Aluma cut refers to carbide burrs specifically engineered for processing aluminum alloys. The advantages of carbide burrs with Aluma cut designation are outlined as follows:
1. Speed /RPM
The speed at which you use your carbide bur in your rotary tool will depend on the material you're using it.
The contour being produced but it's safe to say you do not need to exceed speeds of 35,000 RPM.
The table below shows some approximate speeds:
| Diameter of Burr RPM | |
| 3mm or 1/8" | 17,000 - 26,000 |
| 2.35mm or 3/32" | 17,000 - 26,000 |
| 6mm or 1/4" | 11,000 - 16,500 |
| 12mm or 1/2" | 8,000 - 12,000 |
| 16mm or 5/8" | 7,650 - 11,500 |
2. Apply only a little pressure
As with all drill bits and burrs, let the burr do the work and apply only a little pressure otherwise the cutting edges of the flutes will chip away or become smooth too quickly, reducing the life of your burr.
3. Keep The Carbide Burr On The Move
When using your carbide burr try not to keep it still for too long as this will prevent the burr from digging and jabbing into your material causing unsightly marks and roughness.
Packaging Details
Plastic box in
Standard export carton
KINGTOOLS F125W06-45 Aluma Cut Burr Steel 1/4inch Tungsten Carbide Burr F1225 Die Grinder Burr
Port
CHENGDU/SHENZHEN/SHANGHAI/GUANGZHOU
